
Input Sensors | Integrated /Remote Oxygen Sensor |
Range & Resolution Oxygen | 0 to 25 Percent V/V, 0.01Resolution |
Accuracy: | |
Oxygen (O2) | 1% of Full Scale |
Indication | |
Display | 4 digit Seven Segment 0.4 inch Red LED display for O2 indication |
Status indication | 2 LEDs for Alarms Integrated Buzzer for process violation of Alarm limits. |
Communication: | |
Communication | Isolated RS-485 communication with ModbusRTU Protocol |
Programmable Setting | Baud rate 9600 bps, Parity (O/E/N), Data bits (7/8), Stop bits(1/2) |
No. of salve ID | 1-250 |
Optional | |
Relay | 1 No. SPDT Relay for Rating -2A/120VAC, 2A/24VDC |
Programmable Parameters: | |
Set point | 2 Nos. AL1, AL2 User Programmable |
Programming of parameters | 3 Nos. push button front keys (with password protection) |
Alarm logic | High or Low, user programmable |
Environmental: | |
Operating Ambient Temp. | 0 to 50 Degree Centigrade |
Humidity | Below 90 Percent RH, Non condensing |
Electrical: | |
Supply voltage | 24VDC +/-10 Percent |
Power consumption | Less than 1.2 watt at 24VD |
Dimensions: | |
Flush mounting plate | SS-304 |
Front plate size | 110 mm(W) x 90 mm(H) |
Back enclosure | 76 mm (W) x 70mm(H) x 45mm(D) MS with powder coated |
Mounting | Modular wall mounting with Stainless Steel Front |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |