Gas Detector

Gas Detector

8000.00 - 16000.00 INR/Piece

Product Details:

  • Power Supply 18 to 36 VDC, Typically 24 VDC, derived from SCU for fail safe operation.
  • Power Consumption 3.6 Watt max at 24 VDC Watt (W)
  • Accuracy ± 5% of Full Scale Range (Sensor, Signal conditioning unit & Display Unit all Combined) mm
  • Supply Ability : 300 Piece Per Day
  • Click to view more
X

Price And Quantity

  • 1 Piece
  • 8000.00 - 16000.00 INR/Piece

Product Specifications

  • ± 5% of Full Scale Range (Sensor, Signal conditioning unit & Display Unit all Combined) mm
  • 18 to 36 VDC, Typically 24 VDC, derived from SCU for fail safe operation.
  • 3.6 Watt max at 24 VDC Watt (W)

Trade Information

  • Mumbai
  • 300 Piece Per Day
  • 1 Week
  • All India

Product Description

 

A gas detector is a safety tool that detects the gases presence in any area to ensure complete security against any gas leakage and fire. This has become an essential device to detect the leakage of any combustible material, flammable gases, toxic gases, oxygen depletion or any other emissions that can connect with a control system to automatically shut down the process. This can sound an alarm to make the operators aware in the area about the gas leakage and allowing them to evacuate the place before any mishap take place. It is widely used in oil rigs and other places to observe the manufacturing processes as well as emerging technologies like photovoltaic. It can also be used in fire fighting.

Approval & Compliance

Approval & Compliance for Flameproof :

 

Certified to Ex-d IIA, IIB, IIC, T6, IP66 Compliance with :

  • IS/IEC 60079-0 : 2004
  • IS/IEC 60079-1 : 2007
  • IS/IEC 60529    : 2001

 

 

CE Mark :
Conforms with essential requirement of :

  • Electromagnetic Compatibility Directive 2004/108/EC
  • Compliance to EN50270:2006
  • Low voltage Directive 2006/95/EC
  • Compliance with the IEC 60945 Standard for Marine application

 

 

Technical Specifications :

Sensor Information

 Sensor Make

M/S Ambetronics Engineers Private Limited

 Sensor Model Number

GT-2511-FLP-H2

 Type of Detection

Continuous, Diffusion

 Detection Principle

Semiconductor Type

 Hydrogen Gas Detection range

0 to 800 PPM or 0 to 2% V/V

 Accuracy

± 5% of Full Scale Range (Sensor, Signal conditioning unit & Display Unit all Combined)

 Response time

5-10 Seconds with 800 PPM ( 2% V/V) Hydrogen Gas (Sensor, Signal conditioning unit and Display Unit all Combined )

 Display

8 x 2 alphanumeric LCD with Auto On/Off Backlit Option

 Indication

LED Indications - Provides status of the sensor operation

 Settings in Sensor

By Using the Magnetic Pen or Keys i.e. Set/Next, Shift, Increment

 

Electrical

Supply Voltage Requirement

18 to 36 VDC, Typically 24 VDC, derived from SCU for fail safe operation.

Power consumption

3.6 Watt max at 24 VDC

Environmental

Design Temperature

10°C To + 45°C (Normal)

10°C To + 60°C (Occasional)

Relative Humidity

55% To 85% (Normal), Non Condensing

95% (Occasional) , Non Condensing

 

Signal Output & Error Monitoring

Sensor Output

Industrial Standard 4-20mA current output with configurable Range

Load driving capacity

470 ohms

Hydrogen Detection Sensor connection

Current Output will Be 3.7 mA Break /Open & Sensor LCD display will show the

Break / Open

Sensor Open

Detected H2 gas is maximum than

Current Output will Be 21 mA Sensor Detection Range & Sensor LCD display will

Sensor Detection Range

show the 'Over Range'

 

Application

Detection of hydrogen

  • H2 cylinder store room
  • H2 addition station
  • Gas Unit
  • TG seals (Turbine / Exciter end)
  • H2 dryer area
  • H2 injection lines in the middle of generator.
  • Generator Seal Oil Unit
  • Bus ducts
  • Control / Electrical battery room/s
  • PHT System
  • Battery maintenance shop

 

Sensor Housing

Sensor Housing

Explosion Proof, CIMFR ( CMRI) Certificate vide

certificate no

CIMFR/TC/S/H480

Sensor Housing Material

Cast Aluminium Alloy LM6

Cable Gland

3/4 Inch. ET, Double Compression Cable Gland, CIMFR ( CMRI) Certificate vide

Certificate no

CIMFR/TC/P/H672

Dimension

185 (H) x 215 (W) x 125 ( D) in mm.

Mounting

Wall Mounting

Weight

Approx. 2kg

Necessary mounting bracket/accessories

Custom built

Tag Number / Name Plate

As per customer requirement


AMBETRONICS ENGINEERS PVT. LTD.

* Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



Back to top
AMBETRONICS ENGINEERS PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.