
Features:
*Requires optional USB programming cable and PM Remote Software
Specifications:
Speed Range | 5 to 99,999 RPM |
Accuracy | +/-1 RPM or 0.005Percent of reading |
Resolution | 1 RPM |
Display | 5 digit, 0.56 Percent (14mm) high red LED. |
Display Update | Twice per second above 120 RPM.Programmable with PM Remote Software and USB programming cable. |
Dimensions | 1/8 DIN by 4.5 inch(114 mm) deep. Panel cut out: 3.58 inch x 1.74 inch (91 x 44 mm) |
Input Power: | |
Standard | 100 - 240 VAC+/-10 Percent, 50/60 Hz, Optional: 12 or 24 VDC +/-10 Percent, Isolated, 6VA. |
Inputs | Universal input for optical, proximity, two wire or three wire magnetic, in frared or laser sensors.TTL input or 3.3 VAC to 50 VAC input. Standard input is 1 pulse per revolution. |
Sensor Excitation | 5 VDC or optional 12 VDC or 24 VDC to sensor. |
Recommended Sensors | Optical - Monarch ROS-W,ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - MonarchM-190W or MT-190W In frared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230Inductive - Gas Engine GE-200 (with amplifier) |
Pulse Repeater Output | (Optional) |
0to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable. | |
Analog Output | (Optional) |
VOLTAGE (AO) | 0 to 5 VDC out, 5 mA16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. |
CURRENT (IO) | 4 to 20 mA out, 16bit resolution 12VDC compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and optional USB programming cable. |
Remote Programming | Unit can be remotely programmed using optional communications interface cable and PM Remote Software. |
Environmental | Indoor use only, Installation category II per IEC 664 |
Temperature | -10 degree C to 50 degree C operating per IEC 61010-1 |
Humidity | Maximum relative humidity 80 Percent for temperatures up to 31 degree C, decreasing linearly to 50 Percent relative humidity at 40 degree C. |
Electrical Safety | Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |