
Clean Room Monitor Features:
Applications:
Clean Room Monitor Technical Specification:
Input | |
Sensors | Remote Humidity and Temperature Sensor, Built in differential pressure sensor with Brass Hose Nipples (Chrome Plated) for +ve Pressure connection& -ve Pressure connection provided on SS front plate |
Indication | |
Differential Pressure | Upper 4 digit Seven segments 0.4 inch RED LED display |
Temperature | Middle 4 digit Seven segments 0.4 inch RED LED display |
Humidity | Lower 4 digit Seven segments 0.4 inch RED LED display |
Status indication | 3 LEDs for alarms Integrated Buzzer for process violation of alarm limits any of the 3 parameters. |
Accuracy | |
Temperature | +/- 0.5% of FS |
Humidity | +/- 1.8 Percent of FS |
Differential Pressure | +/- 0.5 % of FS |
Range | |
Temperature | -30.0 Degree Centigrade to 50.0 Degree Centigrade |
Humidity | 0 Percent to 100 Percent RH |
Differential Pressure | -500 to 500 pascal |
Display resolution | 0.1 for Temperature and RH, 1 for Differential Pressure |
Communication | |
Communication | Isolated RS-485 communication with Modbus RTU Protocol |
Programmable parameter | Baud rate, Parity, Data bits, Stop bits |
No. of salve ID | 1-250 |
Programmable Parameters | |
Set point | Programmable as per input selection |
Programming of parameters | 3 Nos. push button front keys (with password protection) Alarm logic: High or Low programmable |
Environmental | |
Operating Ambient Temp. | 0 to 50 Degree Centigrade |
Humidity | Below 90 Percent RH, Non condensing. |
Dimension: | |
Flush mounting plate | SS-304 |
Front plate size | 110 mm(W) x90 mm(H) |
Back enclosure | 76 mm (W) x 70 mm(H) x 45 mm(D) MS with powder coated |
Mounting | Modular wall mounting with Stainless Steel Front |
Electrical | |
Supply voltage | 24VDC +/- 10 Percent |
Power consumption | Less than 1.2 watt at 24VDC |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |