
Outfitted with swift -response sensors, this Gas Leak Detector Alarm is the toughest product available with high durability and efficiency features. This is ideal to provide real-time happening awareness to the workers, members, supervisors as well as safety managers to make them provision for safety of everyone. Its digital sensors can sense gases faster than the any other products ensure swift result when any gas leakage is detected. In addition, its alarm alerts about the potentially dangerous situations. Its rugged design is developed to withstand high temperate, pressure and other adverse environmental conditions. Moreover, it can also easily tolerate a drop of more than 18 ft. without any abrasion and wear. With simple drive circuit, it ensures load resistant features for years.
Gas Alarm Features:
Applications of Gas Leak Detector Alarm:
Gas Alarm Specifications :
General :
Detection Method | Electrochemical |
| Oxygen / Toxic Gases, Infraread/ Solids tate/Combustible |
| 2-Line, 4-Digit 8 mm (H) Seven Segment LED Display 8 LEDs to indicate status of instrument |
| Two independent alarm set points with Latch & Non-Latch Facility. |
User selectable Hysteresis and Logic option. | |
Configurable STEL and TWA set points for Toxic Gases (Optional) | |
| By 3 Keys on front panel for WP Model. |
Performance :
Accuracy | 2% of Full Scale. |
Response Time | T20 < 18 Seconds |
T50 < 22 Seconds | |
T90 < 40 Seconds | |
Start-up Time | Less than 30 Seconds. |
Electrical :
Supply Voltage | 18 to 36 VDC, Typically 24 VDC, 230VAC, 10% |
Power Consumption | Less than 3.6 Watts. |
Cable | For Weatherproof Model : 3 Wire (1.5 mm2) Flexible Cable. |
For Flameproof Model : 3 Core copper wire, Shielde Armored Cable. | |
R-12 ohm / km per core & C - 0.15mFd per Km & Reactance 0.107 hms / km. |
Pannel Mount Housing :
Dimension | Vertical - 96 mm (W) x 194 mm (H) x 213mm (D) |
Horizontal - 183 mm (W) x 90 mm (H) x 213 mm (D) | |
Enclosure | ABS Plastic |
Mounting | Panel Mounting |
Weight | Approx 1.2 Kg |
Weatherproof Housing :
Protection Class | IP-65 |
Cabinet Material | Polycarbonate, Grey Colour |
Cable Entry | Thermoplastic Cable Gland (IP 68) |
Dimension | 183 mm (H) x 222 mm (W) x 110 mm (D) |
Mounting | Wall Mounting / Stand Mounting / Pipe Mounting |
Weight | Approx 1.2kg |
Output Signal :
Standard | 4-20mA Current Output with configurable range selection with 470 ohm load driving capacity. |
Optional | Three SPDT Relay (one for FailSafe and Two for Alarm indication) of rating. |
0 to 10 VDC | |
Optional | RS-485 isolated Port with MODBUS RTU protocol.protocol. |
Error Monitoring :
Environmental :
Operating Temperature | -15 to +550C |
Humidity | Less than 95% Non-Condensing. |
Accessories (Optional) :
Flame proof Housing :
Protection Class | IP-66 for Gas Gr. IIA, IIB & IIC, CMRI Approved Enclosure, CCOE (Optional) |
Cabinet Material | Cast Aliminium alloy, LM-6 |
Cable Entry | Double compression cable gland (Ex-Proof), ET-type |
Dimension | 220 mm (H) x 220 mm (W) x 150 mm (D) |
Mounting | Wall Mounting / Stand Mounting / Pipe Mounting |
Weight | Approx 5.8 Kg. |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |