Loop Power Indicator Flameproof

1000.00 - 10000.00 INR

Get a Price/Quote

Ask A Question Send Inquiry

Price And Quantity

General :

Input	4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter
Range	LPI - 350 -FLP :(-1999 to 9999) with AL1& AL2 indication
Resolution	0001, 000.1, 00.01,0.001
Offset	Adjustable upto +/-10Percent of range
Display	0.39 inch 5 Digit Red LED Display
Display Update Rate	Linear mode- 1 sec;Square root mode- 1sec
Monitor	Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA,settable)
	Display showsouEr, when I/P current goes above set OVER value (from 20.5mA to 21mA,settable)
Operational Mode	Linear & square root; programmable by user
Calibration S/W	calibration
Performance:
Accuracy	Linear +/-0.1Percent of span ; Square root : +/-0.2 Percent of span
Temperature coefficient of accuracy	0.005 PercentFS/Deg.C
Warm up Time	10 Sec
Electrical Loop voltage drop	< 4.8V DC
Environmental Operating Temperature	-10 to 50 Deg.C
Relative Humidity	Below 95 Percent non condensing
Flameproof Housing:-
Protection Class	IP- 65
Approval	CMRI approved for IIA & IIB Gas Group
Cabinet Material	Cast Aluminum alloy, LM-6 / C.I.Enclosure
Cable Entry	1No., Double compression cable gland(EX-proof), 3/4 inch ET-Type
Dimension	155(H) x 190(W) x 100(D) in mm
Mounting	Wall Mounting / Stand Mounting
Weight	Approx. 1 Kg

FEATURES:-

APPLICATIONS:-

Provides Process value Indicator in various Industrial Control & Measurement Application such as Pressure, Flow, Level, Temp.,Humidity etc.
Remote Indicator at point of measurement or at control end especially where there is no power source.
Being Non Voltage Producing Device can be directly used in Hazardous Area with Suitable Enclosure.
Replaces an Analog Meter with no additional wiring and power connection.
Can be inserted at any point in signal loop as a standalone as it requires no external power.
Remote Indication location on tank taps as used in liquid level sensing & control.