Features:-
Applications:-
General :
Input | 4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter |
Range | LPI -400 -PM :(-1999 to 9999) with AL1& AL2 indication |
Resolution | 0001, 000.1, 00.01,0.001 |
Offset | Adjustable upto +/-10Percent of range |
Display | 0.39 inch 5 Digit Red LED Display |
Display Update Rate | Linear mode- 1 sec;Square root mode- 1sec |
Monitor: | |
i) Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA,settable) | |
ii) Display showsouEr, when I/P current goes above set OVER value (from 20.5mA to 21mA,settable) | |
Operational Mode | Linear & square root; programmable by user |
Calibration | S/W calibration |
Performance: | |
Accuracy | Linear : +/-0.1Percent of span ; Square root : +/-0.2 Percent of span |
Temperature coefficient of accuracy: | 0.005 Percent FS/Deg.C |
Warm up Time: | 10 Sec |
Electrical: | |
Loop voltage drop | < 4.8V DC |
Environmental: | |
Operating Temperature | -10 to 50 Deg.C |
Relative Humidity | Below 95 Percent non condensing |
Panel Mount Housing:- | |
Protection Class | IP-40 |
Cabinet Material | ABS Plastic, Black colour |
Cable Entry | Terminal Connector for Connection |
Dimension | 96(H) x 96(W) x 85(D) in mm |
Mounting | Panel Mounting |
Weight | Approx. 250 Grams |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |