Panel Mount Loop Power Indicator (LPI-450 PM)

Send Inquiry

Product Code : LPI 450 PM

Brand Name : Ambetronics

Price And Quantity

Product Specifications

Product Description

Applications:-

Provides Process value Indicator in various Industrial Control & Measurement Application such as Pressure, Flow, Level, Temp., Humidityetc.
Remote Indicator at point of measurement or at control end especially where there is no power source
Being Non Voltage Producing Device can be directly used in Hazardous Area with Suitable Enclosure
Replaces an Analog Meter with no additional wiring and power connection
Can be inserted at any point in signal loop as a stand aloneas it requires no external power
Remote Indication location on tank taps as used in liquid level sensing & control

General :
Input	4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter
Range	LPI - 450 -PM : (-1999 to 9999) with AL1& AL2indication
Resolution	0001, 000.1, 00.01, 0.001
Offset	Adjustable upto +/-10 Percent of range
Display	0.39 inch 5 Digit Red LED Display
Display Update Rate	Linear mode- 1 sec; Square root mode-1sec
Monitor:
Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA, settable)
Display shows ouer, when I/P current goes above set OVER value (from 20.5mA to 21mA, settable)
Operational Mode	Linear & square root; programmable byuser
Calibration	S/W calibration
Performance:
Accuracy	Linear : +/-0.1 Percent of span ; Square root : +/-0.2Percent of span
Temperature coefficient of accuracy	0.005 Percent FS/Deg.C
Warm up Time	10 Sec
Electrical	Loop voltage drop: < 4.8V DC
Environmental:
Operating Temperature	-10 to 50 Deg.C
Relative Humidity	Below 95 Percent non condensing
Panel Mount Housing:-
Protection Class	IP-40
Cabinet Material	ABS Plastic, Black colour
Cable Entry	Terminal Connector for Connection
Dimension	96(H) x 96(W) x 85(D) in mm
Mounting	Panel Mounting
Weight	Approx. 250 Grams