|Home||» Products||» Process Indicators||» Process Control Instruments||» Panel Mount Loop Power Indicator (LPI-500 PM)|
IntelliLogger is a 16/32 Channel Modbus ID Monitoring System for Transmitters are having RS - 485 Modbus RTU Network Connectivity.
IntelliLogger has one more RS - 485 Modbus RTU Port for Remote Repeater Panel called as IntelliRepeater which will repeat all readings & Alarm conditions.
Multidrop RS - 485 Port eliminates separate cabling to each Transmitter and Monitor Panel.
Modbus - RTU Network can be connected in Ring Topology for Redendency.
Scan time for 16 Transmitter < 5 sec. & for 32 Transmitter < 10 sec.
Large 16 x 4 line Display with Configurable Backlit Option.
Auto Page Changing Facility available for easy viewing of Data, Relay & Fault Condition of each Transmitter.
Optional 8 Relays (SPDT) rated "10A / 250VAC, 10A / 30VDC" as Warning / Trip Relay with 1 no. Failsafe Relay which activates for UNDER / OVER / OPEN Condition of Transmitter.
Separate Alarm Setting for each Transmitter with Logic High / Low & Latching Facility.
Password Protected Menu with Password Changing Facility.
Easy Handling & Programming with 3 keys on Front Panel.
Data Logging Capacity upto Six Lakhs Readings for 16 / 32 Transmitter.
Clean Room Monitoring & Validation in Pharmaceutical, Laboratories, Bioscience
Room Mapping in Pharmaceutical
Pharmaceutical process validation with graph & scale report in Autoclave
Healthcare, Hospitals, Shopping Malls
Breweries, Steel Plants, Gas Turbines,
Leak detection, Solvent Vapors,
Personal Monitoring, Compressor Stations,
Emergency response, Equipment Maintenance
Pulp & Paper Industry, Fuel Loading Facilities
Waste Water Treatment Plants,
LNG / LPG Processing & Storage Facilities
Refineries & Petrochemical Plants Including Offshore
Drilling & Plant Shut-downs
ISO Certification Records, Validation process certifying,
Chemical & Hazardous area where data monitoring is essential
Cold Storage & Chilling Plant
Building Management & Energy Saving Systems
Meteorological, Weather Forecast Applications
Remote Indication location on tank taps as used in liquid level sensing & control
Input: 16/32 Transmitters having RS-485 Modbus RTU Port.
16 x 4 Alphanumeric LCD with Configurable Backlit option.
8 LEDs to indicate status of IntelliLogger.
48 LEDs to indicate Alarm status of Transmitters in Group Function.
2 independent Alarm set points for each Transmitter with Latch & Non-Latch Facility.
User selectable Hysteresis & Logic Operation.
Setting: By using 3 keys on the front panel for WP & FLP models.
Log Capacity: Upto Six Lakhs Readings for 16 / 32 Transmitters.
Less than 5 Sec. for 16 Transmitters having RS-485 Modbus RTU Port.
Less than 10 Sec. for 32 Transmitters having RS-485 Modbus RTU Port.
Supply Voltage: 190 to 270 VAC; + 20%, 50Hz.
Power Rating: Approx 20W.
Transmitter: 24VDC, 4A for 16 Transmitters.
Supply: 24VDC, 7A for 32 Transmitters.
1.5mm2 2 Core Shielded Cable for 24 VDC Power Supply.
1.0mm2 2 Core Twisted Pair Cable for RS-485 Modbus RTU Communication.
Storage Temp.: -20 to 60oc
Operating Temp.: -30 to 70oc
Humidity: Below 95% Non-Condensing
Protection Class: IP-65
Cabinet Material: Polycarbonate, Grey Colour.
Cable Entry: Thermoplastic (IP-68) for Weatherproof
Dimension: 305 mm (H) x 325 mm (W) x 170 mm (D)
Mounting: Wall Mounting / Stand Mounting
Weight: Approx 3.7 kg.
Output Signal (Optional)
9 SPDT Relays of rating "10A/250VAC, 10A/30VDC".
4 No. Relay for Warning & 4 No. for Trip & 1 no. for Failsafe Operation for UNDER / OVER OPEN condition of Transmitter.
Open Collector: Open Collector output with 100mA current capacity instead O/P of Relay.
RS-485 Port: Separate RS-485Modbus RTU Port for IntelliRepeater or PC Communication at a time
one Function is possible.
During Sensor Break / Open in the Transmitter connected to it, IntelliLogger shows SENSOR OPEN & Fail safe Relay activates.
During Over Range in the Transmitter connected to it, IntelliLogger shows OVER RANGE & Failsafe Relay activates.
During Under Range in the Transmitter connected to it, IntelliLogger shows UNDER RANGE & Failsafe Relay activates.
If communication fail occurs with any Transmitter then IntelliLogger shows SLAVE NOT RESPONDING for that Transmitter.
FLP / WP Junction Box Enclosure for Inter Connection between Transmitters & IntelliLogger for easy maintenance.
IntelliRepeater Slave Monitor for Remote Display.
Hooter cum Flasher works on 24VDC or 230VAC.
LOG Manager PC Software to download data from IntelliLogger.
RS-485 to USB OR RS-232 convertor.
Protection Class: IP-65 for Gas Gr.IIA & IIB, CMRI approved enclosure & CCOE (optional).
Cabinet Material: Cast Aluminium alloy, LM-6
Cable Entry: 3/4" ET-Type for Flameproof
Dimension: 430 mm (H) x 410 mm (W) x 170 mm (D)
Mounting: Wall Mounting / Stand Mounting
Weight: Approx 13 kg.