Features:-
Applications:-
General : | |
Input | 4-20 mA Loop Current Input from any 2 / 3 Wire Process Transmitter |
Range | LPI - 450 -WP :(-1999 to 9999) with AL1& AL2 indication |
Resolution | 0001, 000.1, 00.01,0.001 |
Offset | Adjustable upto +/-10Percent of range |
Display | 0.39 inch 5 Digit Red LED Display |
Display Update Rate | Linear mode- 1 sec;Square root mode- 1sec |
Monitor: | |
Display shows UndEr/Undr , when I/P current falls below set UNDER value (from 3.6mA to 3mA,settable) | |
Display show souer, when I/P current goes above set OVER value (from 20.5mA to 21mA,settable) | |
Operational Mode | Linear & square root; programmable by user |
Calibration | S/W calibration |
Performance: | |
Accuracy | Linear : +/-0.1Percent of span ; Square root : +/-0.2 Percent of span |
Temperature coefficient of accuracy | 0.005 Percent FS/Deg.C |
Warm up Time | 10 Sec |
Electrical | Loop voltage drop:< 4.8V DC |
Environmental: | |
Operating Temperature | -10 to 50 Deg.C |
Relative Humidity | Below 95 Percent non condensing |
Weatherproof Housing:- | |
Protection Class | IP- 65 |
Cabinet Material | Polycarbonate, Grey colour |
Cable Entry | 1No., Thermoplastic Cable Gland (IP-68) |
Dimension | 120(H) x 100(W) x 60(D) in mm |
Mounting | Wall Mounting / Stand Mounting |
Weight | Approx. 250 Grams |
![]() |
AMBETRONICS ENGINEERS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |